Sinbo SFH 3364 PTC Instrucción De Funcionamiento página 7

* Never use a heater in a room with explosive gas such as petrol. or while using and
kinds of flammable glues. sprays or solvents.
* Prevent overheating of the appliance by keeping the air inlets and outlets clean and
free of anything that may cause blockage. Check all inlets and outlets from time to time
for accumulated dust. DO NOT COVER.
* If overheating should occur, the built-in overheating safety device will shut the appliance
off.
* Do not insert any foreign objects into the grill.
* Keep the rear grill clear of any draped fabric or curtains.
* The appliance must not be positioned directly underneath a fixed power point.
* Children or person who lack the knowledge or experience to use the device or whose
physical, sensory or intellectued capacities are limited must never be allowed to use the
device without supervision or instruction by a person responsible for their safety. Child
are never be allowed to play with the device.
OPERATION OF YOUR HEATER
* Turn the thermostat knob (right) in a clockwise direction until it reaches the maximum
setting.
* Summer service (ventilation only): Turn the knob to setting
* Heating at reduced power: turn the knob(right) to setting I (800W).
* Heating at full power: turn the (right) to setting II (1600W).
* Switching off: turn the knob (left) to setting O.
1
DESCRIPTION
2
1. Thermostat
4
2. Housing
3. Switch
3
4. Air outlet
REGULATING THE THERMOSTAT
When the room has reached the required temperature turn the right thermostat knob
(where included). In an anti-clockwise direction up to the point where the appliance
switches off and not beyond. The temperature fixed in this way will be automatically
regulated and kept at a constant level by the thermostat.
AUTO SAFETY SHUT OFF
This heater is equipped with an AUTOMATIC OVERHEAT SAFETY DEVICE that will turn
off the power to the heating element should the internal temperature of the heater exceed
normal levels. If this should happen the heating element will turn off, but the fan will
continue to run to help cool the heater. Should this condition occur immediately remove
any obstructions and set the heater on a level surface. When the temperature returns
- 6 -