EAS ELECTRIC EMV72VAP Manual De Instrucciones página 56

Caution!
Risk of surface damage
Do not use:
Harsh or abrasive cleaning agents.
1.
Cleaning agents with a high alcohol content.
2.
3. Hard scouring pads or cleaning sponges.
4
High-pressure cleaners or steam cleaners.
. 5 .
Special cleaners for cleaning the appliance while it is hot.
Wash new sponge cloths thoroughly before use.
Tip
Highly recommended cleaning and care products can be purchased through
specialized retailers.
Observe the respective manufacturer's instructions.
Area Appliance exterior
Appliance
exterior
Stainless steel
front
Plastic
Painted
surfaces
Control
panel
Door
panels
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Remove flecks of limescale, grease, starch and albumin
(e.g. egg white) immediately. Corrosion can form under
such flecks
Special stainless steel cleaning products suitable for hot
surfaces are available from our after-sales service or from
specialist retailers. Apply a very thin layer of the cleaning
product with a soft cloth.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Do not use glass cleaner or a glass scraper.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth. Do
not use glass cleaner or a glass scraper.
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Do not use a glass scraper or a stainless steel scouring pad.
Cleaning
21 V.1