Reversing The Lid Opening Direction; Connecting The Cooler - Dometic CFX3 Serie Instrucciones De Uso

Ocultar thumbs Ver también para CFX3 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation
• On a regular basis, make sure the lid seal still fits properly.
• Defrost the cooler once a layer of ice forms.
• Avoid unnecessarily low temperatures.
7.3

Reversing the lid opening direction

CFX3 55IM, CFX3 100
➤ Proceed as shown (fig. 5, page 5).
CFX3 75DZ, CFX3 95DZ
➤ Proceed as shown (fig. 6, page 6).
7.4

Connecting the cooler

!
WARNING! Fire hazard
The DC plug housing gets hot when operating in hot weather for
extended periods. Allow cooling off before disconnecting the DC plug.
!
WARNING! Fire hazard
Do not connect more than one power source to the product at any given
time. Electrical system damage can occur and may result in a fire.
A
NOTICE! Damage hazard
• For protection of the device the DC cable supplied includes a fuse
inside the plug. Do not remove the fused DC plug.
Only use the DC cable supplied.
• Disconnect the cooler and other consumer units from the battery
before you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
Connecting to a battery
➤ Proceed as shown (fig. 7, page 7).
Connecting to the Portable Battery Pack PLB40 or the Hardwiring Kit
HWK-DC (accessories)
➤ Proceed as shown (fig. 8, page 7).
26
CFX3
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido