Racing RAC1440ET Instrucciones Originales página 20

Always use this device according to the instructions in this manual.
1. Training
a) Read the instructions carefully. Be familiar with the controls and the proper
use of the equipment;
b) Never allow children or people unfamiliar with these instructions to use the
machine. Local regulations can restrict the age of the operator;
c) Never work while people, especially children, or pets are nearby;
d) Keep in mind that the operator or user is responsible for accidents or hazards
occurring to other people or their property.
2. Preparation
a) While working, always wear substantial footwear and long trousers. Do not
operate the equipment when barefoot or wearing open sandals;
b) Thoroughly inspect the area where the equipment is to be used and remove
all objects which can be thrown up by the machine;
c) Before using, always visually inspect to see that the tools are not worn out or
damaged. Replace worn out or damaged elements and bolts in sets to
preserve balance.
3. Operation
a) Do not operate the engine in a confined space where dangerous carbon
monoxide fumes can collect;
b) Work only in daylight or in good artificial light;
c) Always be sure of your footing on slopes;
d) Walk, never run with the machine;
e) Work across the slopes, never up and down;
f) Exercise extreme caution when changing direction on slopes;
g) Do not work on excessively steep slopes;
h) Use extreme caution when reversing or pulling the machine towards you;
i) Do not change the engine governor settings or over speed the engine;
j) Start the engine carefully according to manufacturer instructions and with feet
well away from the tool;
k) Do not put your hands or feet near or under rotating parts;
l) Never pick up or carry a machine while the engine is running;
m) Stop the engine when you leave the machine;
4. Maintenance and stockage
a) Keep all nuts, bolts and screws tight to ensure the equipment is in safe
working condition;
19