Maintenance And Storage - Racing RAC1440ET Instrucciones Originales

stance. Do not work on extremely steep slopes.
Transport
Caution! Before transporting the device, switch off the motor.
The tines and the unit maybe damaged even if you move the device with the motor
switched off, e.g. over solid ground. Prevent the tines from touching the ground by
carrying out the device by its guide bar, or with the additional wheels in correct
transport position.
Clearing tines of foreign objects
During operation, a stone or root could become lodged in the tines, or tall grass or
weeds may become wrapped around the tine shaft.
To clear the tines, release the trigger lever. Unplug the tiller, and dislodge or remove
any obstacles from the tines or tine shaft.
To ease removal of tall grass or weeds that are wrapped around the tine shaft,
remove one or more of the tines from the tine shaft. See Tine Removal and
Installation in the manual.

Maintenance and Storage

Before carrying out any maintenance operations, cut off the electric power supply by
disconnecting the plug from the extension cable.
Prior to each time the application is used
Check the connecting cable for signs of damage or ageing. Replace the cable if it
is cracked, split or damaged.
Check the lubricant of gearing case after every use or 40 hours operation.
Replace the lubricant when necessary.
Check the condition of the cutting tines, and ensure that all threaded connections
are securely tightened.
If the tines are blunt, take it to a specialist workshop for repair if necessary.
Once per season
Lubricate the tines and shaft.
At the end of the season, have the application checked and serviced in a
specialist workshop.
25