Double Insulation - Racing RAC1440ET Instrucciones Originales

It is not designed for use in public areas, parks, sports areas, and in agriculture and
forestry.
Using the application for any other purpose is considered incorrect and unapproved.
The manufacturer is not liable for any damage or injury resulting from such use. The
user is entirely responsible for any associated risks.

Double insulation

The application has double insulation. This means that all external metal parts are
insulated from the electrical supply.
This is achieved by introducing an insulation layer between electrical and
mechanical parts. The double insulation guarantees you the greatest possible
safety.
Assemble (Fig. 1)
Fixing the bar
Insert one side of the bottom bar section (42) into the hole in the machine housing
(25). (Fig 1a)
Turn the bar in a clockwise direction upwards, then attach the other side of the
bar.
Attach the bracket (44) to the section of the lower bar (42) and secure it with two
supplied screws and nuts (43).
Fit the connecting bar (47) to the section of the lower bar (42) and secure it with
two screws (50) and nuts (49) supplied. (Fig. 1b)
Mount the safety switch (51) on the section of the connecting bar (47) and secure
it with two screws. (Fig. 1c)
Slide the cable support onto the connecting bar.
Attach the handle (51) to the connecting bar (47) and secure it with two screws
(50) and nuts provided (49). (Fig 2d)
Fully tighten all screws and nuts.
Use the two cable ties provided to hold the cable.
Starting
Connection the mains (Fig. 2)
Connect the appliance connection line to the safety control combination and secure
it with the cable relief (48). The power cord loop should be long enough for the cord
23