Descargar Imprimir esta página

Steren CCR-120 Instructivo De Uso página 4

Publicidad

Fig. 9
ALINEACIÓN
Utilice esta perilla para alinear las llantas delanteras. (Fig. 11)
Si al momento de utilizar el automóvil, éste se desvía hacia la derecha o a
la izquierda, utilice esta perilla para ajustarla.
Para comprobar que está alineado, deberá colocar el automóvil en el piso
y hacerlo funcionar. Deberá ajustar la perilla las veces que sean
necesarias hasta que logre la alineación correcta.
REFACCIONES
El paquete incluye dos llantas de refacción por cada uno de los autos,
para cambiarlas, simplemente utilice un desarmador y retire el tornillo
central, jale la llanta para quitarla. Inserte la nueva llanta haciendo
coincidir los lados del hexágono y asegúrela volviendo a atornillarla.
ESPECIFICACIONES
Frecuencia:
Alcance:
Escala:
Control Remoto
Entrada:
Automóvil
Entrada:
Cargador de baterías
Entrada:
Salida:
Nota:
El diseño del producto y las especificaciones pueden cambiar sin previo
aviso.
Fig. 7
49MHz o 27MHz
50m
1:10
9V
7,2V
750mA (Batería sellada)
110V~
60Hz
7,2V
200mA
Fig. 10
ALIGNMENT
Use this control to align the front wheels (Fig. 11).
If you note that the car suffer a deviation to the left or right when you use it,
then use this knob.
Use the car to check the new alignment.
You must adjust the knob many times as you need, until you get the
correct alignment.
ADDITIONAL PARTS
This package includes two additional wheels (one per each car), to change
them, use a screwdriver, and remove the central screw, then pull out the
wheel. Insert the new wheel in the axle and fasten it screwing it tightly.
SPECIFICATIONS
Frequencies:
Maximum range:
Scale:
Remote Control
Input:
Racing Car
Input:
Battery charger
Input:
Output:
Note:
Product design and specifications are subject to change, without notice.
Fig. 8
Fig. 11
49MHz or 27MHz
164ft
1:10
9V
7,2V
750mA (Sealed Battery)
110V~
60Hz
7,2V
200mA

Publicidad

loading