Special Warnings; Grounding Instructions - HoMedics ULTRA FR-700RC Manual

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SPECIAL WARNINGS

Caution:
• DO NOT reach for an appliance that has fallen into water. Unplug
it immediately.
All servicing of
• DO NOT use while bathing or showering. Use only in a dry area.
this footbath
must be
• DO NOT place or store appliance where it can fall or be pulled
into a tub or sink. DO NOT place in or drop into water or other
performed
liquid.
by authorized
• DO NOT attempt to plug or unplug unit while feet are in the
HoMedics
water.
service
• Use appliance on a sturdy or level surface.
personnel only.
• If you have any concerns regarding your health, consult your
doctor before using your HoMedics footbath.
• Consult your doctor before using in case of illness or medical
condition, including but not limited to pacemaker use and
pregnancy.
Caution:
• We recommend using this unit for no longer than 30 minutes at a
To avoid injury
time. Extensive use could cause the product to overheat. Should
this occur, discontinue use and allow the unit to cool before
and irreparable
operating.
damage, always
• If you experience pain in a muscle or joint for a prolonged period
remain seated
of time, discontinue use and consult your doctor. Persistent pain
when using
could be a symptom of a more serious condition.
footbath.
• NEVER use any footbath on open wounds, discolored areas, or
Never stand on
any area of the body that is swollen, burned, inflamed or where
or in the unit.
skin eruptions or sores are present.
• Use of this product should be pleasant and comfortable. Should
pain or discomfort result, discontinue use and consult your
physician.
• NEVER use while sleeping or drowsy.
• Always unplug the unit when filling or moving the unit.
• Ensure that your hands are dry when operating the controls or
removing the plug.
• This product should NEVER be used by any individual
fering from any ailments that would limit the user's capacity to
operate the controls.
All manuals and user guides at all-guides.com
4
Grounding Pin
Figure A
Tab for
Grounding
Adapter
Screw
Figure B
Grounded
Outlet
Figure C
Metal Screw
Figure D
suf-
Figure E
• This product should NEVER be used by any individual
suffering from any ailments that would limit or altogether
inhibit the user's capacity to feel or have any sensation in
the body part that the product is being used for.

Grounding Instructions

This product must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for the
electric current to reduce the risk of electric shock. This product
is equipped with a cord having an equipment-grounding con-
ductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER
Improper connection of the equipment-grounding con-
ductor can result in a risk of electric shock. Check with a
qualified electrician or serviceman if you are in doubt as
to whether the product is properly grounded. Do not
modify the plug provided with the product - if it will not
fit the outlet, you may temporarily use an adaptor (such
as the one shown in Figure B) until you have a proper
outlet (such as the one shown in Figure C) installed by a
qualified electrician.
This product is for use on a nominal 120-volt circuit, and has a
grounding plug that looks like the plug illustrated in Figure A.
A temporary adapter that looks like the adapter illustrated in
Figure B may be used to connect this plug to a 2-pole
receptacle as shown in Figure D if a properly grounded outlet
is not available. The temporary adapter should be used only
until a properly grounded outlet Figure C can be installed by a
qualified electrician. The tab for grounding screw Figure B
extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box
cover. Whenever the adapter is used, it must be held in place
by a metal screw. See Figures D and E.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido