Kaiser+Kraft 614 627 Manual De Uso Y Mantenimiento página 193

9.7 Weight Count alarm – requested value function
The KPZ 56-1 is equipped with a weight count alarm, this means an alarm will sound, if the indicated value
is higher than the pre-selected value. This value can be either a weight value or a piece count.
Input weight count alarm
Example
press key
key in chosen value (e.g. 100)
enter as piece count: press
enter as weight: press
press key
Delete weight count alarm
Example
press key
press „0" key
press key
press key
Backlight settings
Press the key to enter selection mode
Then press
Key 4: For backlight to remain constantly on.
Key 5: For backlight to become active when
Key 6: For backlight to be deactivated.
9.8 Wyjście na złączu, względnie wydruk na drukarce (opcja)
If the weight of pieces is filed then connection transmit data to connector. If counting pieces is not
nessesary, please insert dummy Weight (example: 1 kg) According to this follow below steps:
Example
Press key 1
Press key
To print required data, please press M+. Further guide is possible to find in chapter
Accumulation (point 9.6).
key
key
- weight exceeds 10 divisions.
- any key is pressed.
Weight Unit
Weight
0,0
- - - -
- - - - 100
- - - - 100
0,0
Weight Unit
Weight
0,0
- - - -
- - - -
- - - -
0,0
Weight Unit
Weight
0,0 0
0,0 1
0,0 1
GB
Quantity
0 0
0 0
0
100
0 0
Quantity
0 0
0 100
0 100
0 0
0 0
Quantity
0
0
0
GB - 23