How To Use - Toto TBW05401 Manual De Operaciones

EN
A

How to Use

z The recommended temperature setting for the water heater is 50°C to 60°C to
ensure a comfortable discharge temperature.
z For safety, the structure is designed to prevent a discharge of very hot water.
(If the temperature control handle has been set correctly, then the maximum
temperature at which water can be discharged is approximately 45°C.)
How to adjust the temperature
A-1
Turn the temperature control handle.
Use the "40" mark as a guide and adjust the "safety button" to your desired
temperature.
For water hotter than about 40°C, keep the safety button pressed while
turning the temperature control handle.
A-2 How to adjust the flow rate
Turn the flow adjustment handle.
Turning the flow adjustment handle counterclockwise increases the flow
and turning it clockwise decreases the flow.
*Turning the flow adjustment handle all the way to the right stops the flow,
but please use the shower Open/Close button to stop the water.
A-3 Discharging/stopping the water (hot water)
Discharging water (hot water)
Press the Open/Close button and water will come out.
Stopping the water (hot water)
Press the Open/Close button again to stop the water.
Setting the temperature control handle
A-4
Turn the temperature control handle all the way to the side where water
comes out of the hand shower.
Turn the temperature control handle to the position where water at the
appropriate temperature (about 40°C) comes out, regardless of the scale.
Remove the temperature control handle.
Attach the temperature control handle at the position of the "40" mark.
33