Operation And Handing; Before First Use; Use - CASO DESIGN AirFry Chef 1700 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 78

15 Operation and Handing

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
Warning
► Do not let the device unsupervised during operation to be able to react quickly in case of
dangers.

15.1 Before first use

Remove all accessory from the inside of the device, clean them with soapy water and dry
them after this. Wipe the bottom and the top of the interior with a damp cloth and thoroughly
dry the interior after this.
The heating elements have a protection layer. At first use vapor can occur. This is not
harmful and do not affect the performance of the device.
Therefore operate the device at first use for 10 minutes on 150°C (AIRFRY program), then
for 10 minutes on 200°C (AIRFRY program) and let it thoroughly aerate after this and let it
cool down.

15.2 Use

1. Insert the plug. After plugging in, the device beeps twice and the display of the program,
temperature and time setting light up.
2. Check that the crumb tray is inserted correctly.
3. Place your food on the baking tray, grill rack or frying basket and slide it into the device.
Or: Place the food on the rotisserie or in the rotating basket and insert it into the device
as described under "Use of rotisserie and rotating basket".
4. Make sure that the oven door is properly closed.
5. Turn the control dial to select the desired program. The illuminated arrow indicates the
selected program.
The preset temperature and time are displayed alternately for 5 seconds each.
6. Press the button
flashing in the display (5 times), you can adjust the setting with the control dial.
7. Press the button
flashing in the display (5 times), you can adjust the setting with the control dial.
8. Press
to start the cooking process.
9. You can pause and continue the process by pressing
and hold the
10. After the set time has elapsed, an acoustic signal sounds. Use oven gloves or the
removal assistance to remove the accessories with food.
11. To turn off the device, press and hold the
► The display shows the set temperature and the remaining time during operation.
► You can adjust the temperature / time setting during the process by repeating step 6 / 7.
to set the desired temperature. As long as the temperature is
to set the desired cooking time. As long as the temperature is
button.
Please note
. To cancel the process, press
button.
38

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

3000

Tabla de contenido