Segway GT Manual De Instrucciones página 3

EN
Dashboard
Speedometer
Headlight (on)
Cruise Mode
Headlight (off)
Lock
Turn Signal Indicator
Speedometer
POWER Progress Bar
Lock
Headlight (on)
Headlight (off)
1WD/2WD
Bluetooth
Cruise Mode
SDTC OFF
03
GT1
POWER Progress Bar
WALK Mode
PARK Mode
SPORT Mode
RACE Mode
Battery Level
Turn Signal Indicator
GT2
BOOST Progress Bar
PARK Mode
SPORT Mode
RACE Mode
WALK mode
Charging Indicator
Remaining Mileage
Turn Signal Indicator
Battery Level
Symbol Name
POWER Progress Bar
Speedometer
SDTC OFF (GT2)
ECO Mode
Cruise Mode
Bluetooth
Warning
Lock
1WD/2WD (GT2)
Warning
Battery Level (GT2)
Battery Level (GT1)
ECO Mode
BOOST Progress
Bar
Bluetooth
Warning
Remaining Mileage
Charging Indicator
Meaning Description
The symbol displays the motor output power of the scooter.
The symbol displays the current speed of the scooter.
The symbol indicates 1) With two-wheel drive, SDTC feature is auto-on in non-RACE modes.
that the SDTC (Segway Note: This feature helps prevent wheel slippage and maintain stability when
Dynamic Traction accelerating.
Control) feature is off. 2) With one-wheel drive, SDTC feature is auto-off in RACE mode.
1) In ECO, SPORT or RACE mode, press the Left Control Switch to turn on the cruise
mode when the speed ≥ 3.1 mph (5 km/h). Once turned on, the scooter will cruise at
the current speed.
The symbol indicates
2) Turn off the cruise mode with the following methods:
that the Cruise mode
Method 1: Twist the throttle or squeeze brake levers.
is activated.
Method 2: Press the Left Control Switch.
Method 3: Switch the speed mode.
DO NOT turn on the cruise mode in complex environments, bad weather or
undesirable road conditions. Serious danger or injury may occur.
When the scooter is locked via the Segway-Ninebot app:
1) The screen will go dark in 3 seconds, at this point, press the Power Button to wake
up the screen.
When the icon lights
2) The scooter will sound the alarm with flashing lights when it is moved for 3
up, it means the
seconds.
scooter is locked.
3) The scooter will keep beeping when it is moved for 10 seconds, and if the scooter
is moved again within 60 seconds, the beep will not stop.
When the scooter is unlocked, it will automatically power off if there is no operation
within 10 minutes.
Note: Enable/Disable this feature via the Segway-Ninebot app.
The icon 1WD indicates that the scooter is in the one-wheel drive mode. The icon 2WD indicates that the
scooter is in the two-wheel drive mode.
The symbol displays the remaining battery power in battery percentage and battery bar.
The symbol displays the remaining battery power in battery bar.
1) Press the Right Control Switch to activate the BOOST mode.
The symbol displays
2) Twist the throttle to accelerate faster.
the remaining
3) Press the Right Control Switch again or switch the speed mode to turn it off.
available acceleration
When the BOOST mode is activated, the scooter will accelerate faster. DO NOT
time of the BOOST
apply this feature in complex environments, bad weather or undesirable road
mode.
conditions. Serious danger or injury may occur.
The symbol indicates that the scooter is connected to the Segway-Ninebot app.
The symbol indicates that the scooter has detected an error. The error code will display on the dashboard.
See page 8 for possible causes and solutions.
The symbol displays the remaining mileage of the scooter.
The symbol indicates that the scooter is charging.
EN
* In RACE mode only.
04