OPERATING ISSUE
Will not start.
Loss of suction.
Machine leaves wet stripes
on floor.
PAGE 5 OF 15
TROUBLESHOOTING
CAUSES
No power to vacuum.
Defective switch or motor.
Loose hose connection.
Blockage in hose or accessories.
The float shut-off has tripped, is
clogged by dirt or is broken.
Tank is full.
Hole in hose.
Worn vacuum head gasket.
Debris is catching on the squeegee
blades or trapped between the
squeegee blades.
1-800-295-5510
uline.com
RECOMMENDATIONS
Ensure power cord is plugged in.
Contact Uline Customer Service at
1-800-295-5510.
Tighten hose connection.
Check hose and accessories for
blockages.
Empty the tank. Ensure the float shut-off
is unobstructed and fully functional.
Empty tank.
Replace hose.
Replace vacuum head gasket.
Clean out debris from the squeegee
blades.
0222 IH-9933