Attaching Handle - Uline H-9933 Manual De Instrucciones

ATTACHING HANDLE

1. Remove handle mounting screws and washers from
mounting points on machine.
2. Secure handle to vacuum using the previously
removed screws and washers. (See Figure 1)
Figure 1
Handle
3. Attach rear hose clamp to back of handle using
provided screws. (See Figure 2)
Figure 2
PAGE 2 OF 15
ASSEMBLY
4. Attach squeegee to front of vacuum. (See Figure 3)
Rear
Hose Clamp
Figure 3
Squeegee
5. Tighten knobs to secure squeegee to vacuum.
(See Figure 4)
Figure 4
0222 IH-9933