First Step - Inspire 84794428 Manual De Instrucciones

• Do not heat batteries
• Do not weld or solder directly to batteries
• Do not dismantle batteries
• Do not deform batteries
• Do not dispose of batteries in fire
• A lithium battery with a damaged container should not be exposed to water
• Do not encapsulate and/or modify batteries
• Store unused batteries in their original packaging away from metal objects. If already
unpacked, do not mix or jumble batteries
• Remove batteries from equipment if it is not to be used for an extended period unless it is
for emergency purposes
• Always select the correct size and grade of battery most suitable for the intended use.
Information provided with the equipment to assist correct battery selection should be
retained for reference.
• Clean the battery contacts and those of the equipment prior to battery installation.
• The battery must be removed from the device before it is discarded;
• The battery must be disposed of safely.
WARNING
• Any modification of the design or configuration of the equipment without consulting the
manufacturer or his authorized representative may create a dangerous situation.
• CCheck that a electrical point is availabe at 2m from roller blind input (for loading)
• Watch the moving shutter and keep people away until the shutter is completely closed;
take care when operating the manual release with the shutter open since it may fall rapidly
due to weak or broken springs
II. COMPOSITION OF YOUR MOTORIZED BLIND
Screen roller blind with its
fixings and motor integrated
III. FIRST STEP
IMPORTANT:
• Check that your packaging contains all the parts of your kit. otherwise contact your store
to find out what to do next.
• Check that you have all the necessary equipment before doing the installation.
52
ADEO Services - 135 Rue Sadi Carnot - CS 00001 - 59790 RONCHIN - FRANCE •
Remote control
(Ref: DD2700H)
Charger
(Ref: JKY0212-
05052000EU)
CE
Power cord
(Ref: XYB-01)