Inspire 84794428 Manual De Instrucciones página 55

It may happen that the fabric pulls to one side (1). If this is the case, perform the following
steps:
• Roll down the shade fully (2).
• Stick a piece of (masking) tape/adhesive tape onto the tube opposite the side to
which the fabric is pulling.
• Roll the shade back up again and check (3): Not enough: use more tape. Too
much: use less tape.
�
a
V. PROGRAMMING
BATTERY CHARGE/ DISCHARGE
The motor use charger with USB 5VDC reference KY0212-05052000EU
• Check that your packaging contains all the parts of your kit. otherwise contact your store
to find out what to do next.
• Check that you have all the necessary equipment before doing the installation.
• Before any installation, check that the dimensions of your blind correspond to those of
your windows. Check the blind's table sizes.
FUNCTIONS REMOTE CONTROL
Up
Stop
Down
ADEO Services - 135 Rue Sadi Carnot - CS 00001 - 59790 RONCHIN - FRANCE •
�
b
�
c
Program button
CE
55