VI. TECHNICAL DATA
PARTS
Tube diameter
Motor model
Motor voltage
Charge voltage
Maximum amperage charger
Power
Torque
Speed
Amperage
Moisture and dust protection
Motor temperature range (heavy use)
Motor temperature range (normal use)
Sound pressure level
Remote control DD2700H
Transmitting frequency
Transmitting power
Operating temperature remote
Transmission distance outside
Transmission distance inside
Charger
Electric insulation Class II Double insulation
Electric insulation Class III Very Low voltage
CE Declaration
Symbol for recycling for the battery
Symbol for recycling for the electrical & electronic product &
parts WEEE
Symbol for recycling for packaging
VII. PRECAUTION
• The awning must be installed in places where it cannot be impacted.
• The support must be adequ ate for the weight of the blind.
• It must be protected against splashing water and damp places.
• Provide enough space around the awning to avoid any risk of blockage or mechanical stress.
• Make sure you can connect your awning to the cable when the USB connection cable is
connected to the motor.
VIII. MAINTENANCE
• Disconnect the electric blind from its power supply before doing any maintenance on the
electrical parts.
• Do not use abrasive or aggressive cleaners, always unplug the connecting cable when cle-
aning the awning. Do not spray liquid on the motor or charger.
• Clean the remote control with a soft cloth.
ADEO Services - 135 Rue Sadi Carnot - CS 00001 - 59790 RONCHIN - FRANCE •
VALUES / SYMBOLS
25 mm
DM25LEU/S-1.1/28
DC 5V
DC 5V
2A
8W
1.1 Nm
28 RPM
0.94 A
IP20
-0°C to + 40°C
-0°C to + 40°C
≤ 46 dB
3V battery CRV2450
433.925 MHZ
10 Millwatt
-5°C to + 50°C
200 m
35 m (between two wall)
100-240V~ / 5Vdc
CE
57