Printing Photographs Directly From A Pictbridge Compliant Device - Canon PIXMA MP520 Guía De Iniciación Rápida

Printing Photographs Directly from a
PictBridge Compliant Device
You can connect a PictBridge compliant device such as a digital camera, camcorder, or mobile
phone using a USB cable recommended by the device's manufacturer, and print recorded images
directly without using a computer.
Connectable Devices
PictBridge is an industry standard enabling a range of digital photo solutions, including the direct
printing of photos from a digital still camera, camcorder or mobile phone* without the need to use
a computer. A device can be connected to this machine for direct printing regardless of the
manufacturer or the model as long as it complies with the PictBridge standard.
* PictBridge compliant digital still cameras, digital camcorders, and camera-equipped mobile
phones are hereafter collectively referred to as "PictBridge compliant device".
A device with this mark is PictBridge compliant.
Printable Image Data Format
This machine prints images taken with a DCF (Design rule for Camera File system) ver. 1.0/2.0-
compatible digital camera (Exif ver. 2.2/2.21 compliant), as well as PNG files.
Printing Photographs Directly from a PictBridge
Compliant Device
To connect a PictBridge compliant device to this machine, use a USB cable recommended by the
device's manufacturer.
Warning
Do not connect any equipment other than PictBridge compliant devices or the optional Bluetooth Unit
BU-20 to the Direct Print Port of the machine. If you do so, electric shock, fire, or damage to the machine
could result.
Important
Never disconnect the USB cable during printing unless when explicitly allowed to by the PictBridge
compliant device. When disconnecting the USB cable between the PictBridge compliant device and
machine, follow the instructions given in the device's instruction manual.
Note
When printing photos with the PictBridge compliant device connected to the machine, we recommend the
use of the AC adapter supplied with the device. If you are using the device battery, be sure to charge it
fully.
1
Prepare for printing.
(1) Turn on the machine.
(2) Load paper in the Rear Tray.
Note
When printing directly from a PictBridge compliant device, you can only use the Rear Tray as the
paper source. Do not load paper in the Front Tray.

Printing Photographs Directly from a PictBridge Compliant Device

25