Before Operation - IMG STAGELINE VU-800PRO Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19

5 Before Operation

Prior to connecting any devices or to changing any existing
connections, switch off the VU meter .
1) Connect the stereo input AUDIO IN (6) to a line level out-
put of the device whose level is to be indicated, e . g . effect
unit, mixer .
2) A subsequent device (e . g . amplifier, second mixer) can
be connected to the stereo feed-through output AUDIO
OUT  (7) . Connect the output AUDIO OUT to a line level
input of the device .
3) Connect the power supply unit provided to the jack
"12 V ⎓ " (5) and then to a mains socket (230 V/ 50 Hz) .
4) Prior to the first operation, a basic adjustment of the
VU meter must be made (
5) Switch on the VU meter with the POWER switch (4) . Select
the display mode of the LEDs (3) via the switch (2):
Position BAR = bargraph display
Example: If a level of −12 dB is measured for a channel,
all LEDs "−45 dB" to "−12 dB" will light up .
Position DOT = dot display
Example: If a level of −12 dB is measured for a channel,
only the two LEDs "−12 dB" will light up .
chapter 4) .
6) Feed the audio signals to the VU meter and read the signal
levels on the LED display . An optimum adjustment of the
signal source has been obtained when the "0 dB" LEDs light
up during music peaks . In case of overload (ranges exceed-
ing "0 dB" light up), reduce the level of the signal source .
7) For switching off, press the POWER switch . If the VU meter
is not used for a longer period, disconnect the power sup-
ply unit from the mains socket as the power supply unit will
consume some power even when the VU meter has been
switched off .
6 Specifications
Version: 3-coulour LED display of 40 LEDs per channel
Display range: steps of 3 dB from −45 dB to +12 dB
Input sensitivity: approx 350 mV – 7 V
Power supply: via PSU provided, connected to ~ 230 V/ 50 Hz
Ambient temperature: 0 – 40 °C
Dimensions: 482 × 45 × 50 mm (W × H × D), 1 rack unit
Weight: 695 g
All rights reserved by MONACOR
No part of this instruction manual may be reproduced in any form or
by any means for any commercial use.
Subject to technical modification .
INTERNATIONAL GmbH & Co. KG.
®
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

1000804

Tabla de contenido