Function And Device Overview - HomeMatic IP HmIP-WKP Manual De Instalacion Y Uso

Function and device overview

The device must only be operated in locations where it is protected
from the effects of weather. The device must be protected from the
effects of vibrations, solar or other methods of heat radiation, and
mechanical loads.
The device may only be operated within residential buildings.
Using the device for any purpose other than that described in this
operating manual does not fall within the scope of intended use and
will invalidate any warranty or liability.
3 Function and device overview
With the Homematic IP Keypad, combined with your Homematic IP door
lock actuator, you can give up to eight family members, friends, etc. ac-
cess to your smart home. The door can be opened, locked or unlocked
by entering a PIN. In addition, other Homematic IP components can be
used to create versatile coming/leaving home scenarios (e.g. switching
on the hallway lighting).
You can configure the door and display its current status via the free
Homematic IP app.
Wireless communication and battery operation mean the keypad can be
installed anywhere. A mains connection near the door is not necessary.
You can use the enclosed screws and wall plugs for installation at your
chosen location.
The integrated proximity sensor gives you additional convenience. Thanks
to the integrated illumination, you can always make out the keys on your
keypad even in dim outdoor lighting.
Device overview (see figures 1 and 2):
(A) Wall bracket
(B) Keypad
26