Steinberg Systems SBS-RS-40 Manual De Instrucciones página 37

50 C,
o
- lower for indoor temperature:
0 o C,
- upper limit for humidity inside the room and outside sensor:
99 %,
- lower limit for humidity inside the room and an outside sensor:
20 %,
- upper limit for outdoor sensor temperature: 70
- lower for outdoor sensor temperature: -50
8. ACTIVATION/DEACTIVATION OF WARNINGS:
a) Press the "CHANNEL" button in the standard operating mode of the unit.
The "CH1" message will appear on the display. Press the "CHANNEL" button
until the display again shows the message corresponding to the desired
channel (order of messages displayed: "CH1" -> "CH2" -> "CH3" -> "IN" ->
"CH1").
b) Press the ALERT button.
c) The option to activate/deactivate measurement warnings will be displayed.
d) Use the "ALERT" button to select the desired option.
e) Press the "CHANNEL" button to move to the next channel and
activate/deactivate warnings for all sensors in the same way.
f) To activate/deactivate the warning function for all channels simultaneously by
removing the limit values press the "ALERT" button during the standard
operation mode of the unit.
If the limits are set and the warning function is enabled the display will
show the messages .
o C,
o C.