Gude GH 18-0 30KW Traducción Del Manual Original página 23

Before using the device, always check that the
pressure controller seal is correctly fitted and working
properly.
Before use, make sure the gas bottle contains gas
designed for the work being done.
Gas bottles must always be safely fixed in a vertical
position on a wall support or on a specially manufac-
tured gas bottle cart.
The liquid gas cylinder must be changed in a well-
ventilated room or outdoors, and away from open
flames (cigarettes, candles or other devices with open
flames).
The bottle with shielding gas and the fixed adjust-
ment gas current equipment must not be moved. The
gas bottle valve must be closed during transport.
Close the gas bottle valve after use.
Smell of gas or suspect leakage
If you smell gas or suspect a leak, do not use the
device. If the device is in use, the gas supply must be
shut off immediately. Immediately open windows
and doors. Do not press any electrical switches (e.g.
light switches), do not use a telephone or similar and
do not use any naked flames or sources of ignition!
The device must be checked and any faults remedied
before it can be used again.
Emergency procedure
· Stop the gas supply to the device.
· Move out of the danger zone immediately and
make sure that no other persons are in the
danger zone.
· Call the fire brigade.
Maintenance
Take the replaceable battery from the appliance
before any extension, cleaning and servicing works.
Check the gas hose lines at least once a month as well
as every time the gas cylinder is replaced. If there are
any signs of damage, the hose lines must be replaced.
The entire device must be checked for correct func-
tionality, including a leak test, once a month. A leak
test can be carried out with a leak detection spray or
soapy water, for example.
Check the position of the ignition electrodes after
every 50 hours of use. There should be a gap of 5-7
mm.
After every 50 hours of use, check the position of
the ignition electrodes and check the connection
between the temperature controller and the tempe-
rature sensor for contamination. If dirty, clean with
a cloth.
Always switch off the device if you cannot leave it in
a safe state.
Clean the fan blades and the inside of the heater with
compressed air every season or as needed.
Repairs and works specified in these instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Always keep the device clean, as well as the venti-
lation slots in particular. Never spray water on the
device body!
Do not clean the plastics with solvents, flammable or
toxic fluids. For cleaning, use a damp cloth only.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
Storage
Always remove the battery and gas cylinder when the
device is not in use or in storage! Refer to the relevant
chapters for instructions.
Store the device and its accessories in a dark, dry
and frost free place, which cannot be accessed by
children.
The optimum storage temperature is between 5 and
30°.
Never store the liquid gas cylinder in environments or
rooms below ground level!
Never store liquid gas cylinders in unventilated
places!
The gas cylinders must be fitted with valve protection
caps and lock nuts when stored.
Gas cylinders must always be stored upright! This also
applies to empty gas cylinders!
Warranty
Warranty period of 12 months applies to commercial
use and 24 months applies to private use and com-
mences on the day of purchase of the device.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be
submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
ENGLISH
23