Gude GH 18-0 30KW Traducción Del Manual Original página 24

24
rating and assembly instructions and common wear
are also not included in the guarantee.
Important information for the
customer
Please note that returns within or outside the
warranty period should always be in the original
packaging. This measure effectively avoids
unnecessary transport damage and any associated
disputed ruling. Your equipment is optimally
protected only in the original box, and keeping it
in that box will ensure smooth processing.
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
We will quickly help you and without needles bure-
aucracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In
order to identify your device in case of claim we need
the serial No., product No. and year of production. All
this data can be found on the type label.
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Failure removal
Error
The motor does not start
Piezo-ignition does not
ignite
No gas
Burner ignites, flame goes
off as soon as the gas
valve is turned on
Burner flame goes off
during operation
Transport packaging disposal
The packaging protects the machine against damage
during transport. Packaging materials are usually
chosen based on environment aspects and waste
treatment principles and are therefore recyclable. Re-
turning the packaging into material circulation saves
raw materials and reduces waste production. Parts of
packagings (e.g. foils, styropor®) can be dangerous
for children.
Do not dispose of electrical appliances in household
waste; use the local collection points. Ask your local
authority where the collection points are to be found.
If electrical equipment is disposed of in an uncontrol-
led manner, weathering can lead to dangerous sub-
stances entering the groundwater and from there the
food chain, or the flora and fauna can be poisoned for
years. If you replace the device with a new one, the
seller is legally obliged at the least to take back the
old one to be disposed of free of charge.
Risk of suffocation!
Keep parts of the packagings out of reach of children
and dispose them as soon as possible.
Causes
No electricity
Electrode in incorrect position
Gas cylinder empty
Closed valve on the gas cylinder
Gas hose or leaking connection
Thermal element not yet hot properly
Safty thermostat turned off
Excessive gas output
Gas cylinder empty
Insufficient gas input
Wind or air draught extinguishes
flame
Remedy
Charge the battery
Use a fully-charged battery
Call specialist
Replace gas cylinder
Open valve
Seek for leaking point by suitable spray
and remove
Try again
Let the device cool down and then retry
Have the reduction valve checked or
replaced
Replace gas cylinder
Check and clean motor grid
Check fan
Place the device outside wind or air
draught, let it cool down for several
minutes and then retry