Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
USE
•
Put the mains plug in an earthed wall socket.
•
Carefully pull the pan out of the aerofryer.
•
Put the ingredients in the pan, make sure the aeroplate
(removable grid) is placed in the pan before you put in the
ingredients.
•
Slide the pan back into the aerofryer.
•
Do not touch the pan during and directly after use, as it gets very
hot. Only hold the pan by the handle.
•
When the pan is cold, please warm up the pan for 5 minutes on a
temperature of 80 degrees. After this, the appliance is ready for
use.
•
There are 12 frying programs included: Aerofryer Fries, Cake,
Potato, Biscuits, Egg tart, Peanut, Chicken drumsticks, Chicken
wings, Fish, Shellfish/Crustaceans, Beef and Ham. Use the
preset button to select the desired program.
•
Press and hold the power button for 3 seconds to set the
aerofryer default temperature (200°C) and time (15 minutes).
Selecting the power button a second time will start the aerofryer.
Pressing the power button for 3 seconds again to stop the entire
device during cooking. All the lights go out, the fan stops working.
•
When you press the preset button, the aerofryer will start the
corresponding program. When you have chosen the wrong
program, you can abort by pressing the preset button again. The
appliance will stop after 20 seconds. After this you can select
another function. It is also possible to adjust the chosen program
by changing the time and temperature.
•
The time can be adjusted with the timer control buttons. Press
the timer control buttons one time to increase or decrease the
frying time by one minute. Press and hold one of the buttons to
adjust the time faster. You can set the timer between 1 and 60
minutes.
•
The temperature can be adjusted with the temperature control
buttons. Press the temperature control buttons one time to
increase or decrease the temperature by 5 degrees. Press and
hold one of the buttons to adjust the temperature faster. You can
set the temperature between 80 and 200 degrees.
•
It is also possible to start the appliance without selecting a
function. Set the time and temperature with the timer and
temperature control buttons, then press the power button.
•
When you pull out the pan during the frying process, the
appliance will shut off automatically. When you reinsert the pan,
the program will resume.
•
To cancel any program, press the power button. The aerofryer
will shut off after 20 seconds.
•
During the hot air frying process, the heating-up light comes on
and goes out from time to time. This indicates that the heating
element is switched on and off to maintain the set temperature.
•
Excess oil from the ingredients is collected on the bottom of the
pan.
•
Some ingredients require shaking halfway through the
preparation time. To shake the ingredients, pull the pan out of the
appliance by the handle and shake it. Then slide the pan back
into the aerofryer.
Instruction manual
EN
5
Publicidad
Tabla de contenido
