Kohler Loure K-123L36-SANL-CP Instrucciones De Instalación página 18

12. Install the Drain
Disassemble the drain.
Apply plumbers putty to the underside of the flange and attach.
Apply thread sealant tape to the drain pipe threads. Tighten the nut.
Connect the trapway. Wipe away excess plumbers putty.
Complete the Installation
NOTE: Avoid the area in front of the sensor for 2 minutes after connections are
complete. The sensor will not function correctly if it is triggered in the first 2 minutes.
Disconnect and reconnect the power to reset the sensor.
Install the faucet trim following the directions provided.
Turn ON the water supply and check for leaks.
1386433-2-B
Stainless
(Non-Staining)
Plumbers Putty
18 Kohler Co.