Kohler Loure K-123L36-SANL-CP Instrucciones De Instalación página 6

2. Install Tubing (Recommended)
NOTE: Tubing (not provided) can be attached to the mounting bracket to route the
cables and the spout tube to the control box. PVC fittings (not provided) are
recommended.
NOTE: Refer to the specification sheet to determine the control box installation
location.
Connect a 90 degree elbow and a straight tube to the mounting bracket as shown.
Verify the tube is long enough to reach the control box.
Connect another elbow to the end of the tube at the control box installation
location.
Install the plaster guard with the screw.
1386433-2-B
6 Kohler Co.