Kohler Kumin K-104K36-SANA-CP Instrucciones De Instalación página 12

7. Install Hybrid Power Unit
Hybrid Battery
IMPORTANT! Verify that you are following the correct power system installation
based on your model number. For a DC power unit installation, refer to "Install DC
Power Unit."
IMPORTANT! In the event of leaking batteries, replace battery box and batteries.
Unthread the control box screws to remove the control box cover.
Connect the power cords.
Place the hybrid battery into the empty space within the control box.
Secure the control box cover to the control box.
IMPORTANT! The area in front of the sensor must be free of objects during the 2
minute learning cycle or the faucet may not function properly.
Allow 2 minutes for the sensor to cycle through the automatic sensing distance.
1357694-2-B
Power Cord
Power Cord
12
LED
Kohler Co.