Kohler Kumin K-104K36-SANA-CP Instrucciones De Instalación página 7

4. Connect the Supplies
Tube From
Spout
Inlet Connections
Connect the flex hose to the supply stop.
Place a bucket under the supply stop and turn ON the water supply.
Slowly open the supply stop to flush debris.
Turn OFF the water.
Remove and discard the cap from the filter screen assembly.
Connect filter screen assembly to control valve inlet.
Connect the flex hose to filter screen assembly.
Outlet Connections
Verify that the tube from the spout is the appropriate length to reach the control
box. Cut the tube if necessary. Remove any burrs and sharp edges.
Kohler Co.
Flex Hose
Supply
Stop
Outlet
Flex Hose
Inlet
7
Filter Screen
Assembly
1357694-2-B