Operation Of The Propass Conveyor And Swivel Kit; Safety - TYCROP ProPass 180 Top Dresser Manual Del Operador

Figure 32: Medium Spread settings (arrows indicate direction of travel to change the spread pattern)
Operation of the ProPass Conveyor and
Swivel Kit

Safety

Never travel with the ProPass Conveyor extended.
Always place the Conveyor back to its travel position
(see Figure 20 above) before moving the Propass from
a location.
At full capacity the Conveyor can move as much
material as the ProPass can expel to it. The Conveyor
is speed controlled by the option speed control on
your EH or SH hydraulics.
The ProPass Conveyor is equipped with a rubber
deflector that may be used to direct material. Figure
33 shows the conveyor being used without the
deflector, Figure 34 shows the deflector being used to
direct the material immediately down.
Figure 33: Conveyor operation without deflector
Page 32
All manuals and user guides at all-guides.com
TYCROP Manufacturing Ltd. ProPass 180 Top Dresser Operator's Manual
Figure 34: Conveyor operation with deflector
Operating Instructions