Repair; Decommissioning, Storage And Disposal - Dantherm Master DHP 20 Manual De Instrucciones

11 Repair

During the warranty period, all repairs must
be performed by persons authorised by the
manufacturer.
After the warranty period has elapsed, cer-
tain repair can be carried out by the device
owner, provided he or she has the neces-
sary skills. Such repairs are not covered by
the manufacturer's warranty.
If you have any queries concerning the re-
pair of your device, contact your dealer or
HEYLO Customer Service.
12 Decommissioning, storage
and disposal
Decommissioning
1. Pump out the condensate.
2. Switch off the device at the device switch
and disconnect the power plug.
3. Clean the device (see Maintenance and
cleaning).
4. Disconnect all incoming and outgoing
lines (discharge and power supply lines).
5. Package the device so that it is protected
against moisture and dust.
12
Storage
CAUTION! Risk of injury from device top-
pling over
Ü Do not stack more than two devices one
on top of the other.
Ü Secure devices against toppling over.
Procedure
Store the device at a temperature between
5 °C and +40 °C.
Disposal
CAUTION! Risk of damage to the envir-
onment from hazardous substances
Ü Dismantle the device and recycle or dis-
pose of the materials according to the
applicable statutory regulations.
Ü For the disposal of auxiliary materials
and consumables, observe the informa-
tion in the safety data sheets and the ap-
plicable statutory regulations.
Do not dispose of the device as
household waste.