Anker Nebula Cosmos Max Manual Del Usuario página 13

EN
[Projector Mode]
[Picture Settings]
[Picture Mode]
[Brightness]
[Contrast]
Advanced Settings
Back to Default
5. Apps
① On the home page, select
② Select an app and check the current version, open or force stop, check the storage
used, clear data or cache, or enable or disable notifications and permissions.
6. Others
On the home page, select
[About]
[Date & time]
11
All manuals and user guides at all-guides.com
[Auto]: Automatically detects whether the projector is inverted.
Automatically switch between these options.
[Front Projection]: The projector is located in front of the
projection surface.
[Rear Projection]: The projector is located behind the
projection surface.
[Inverted Front Projection]: The projector is hanging from
the ceiling in an upside down position. The image is
rotated by 180 degrees.
[Inverted Rear Projection]: The projector is hanging
from the ceiling in an upside down position behind the
projection surface. The image is rotated by 180 degrees
and horizontally mirrored.
[Standard] / [Movie] / [Office]
Note: When selecting a different mode, color brightness,
contrast and advanced color settings differ.
Adjust color brightness between 0 and 100%
Adjust color contrast between 0 and 100%
Adjust color Saturation, Hue, Gain and Gamma
Press Enter to back to the default setting
> [Apps], and press
to find more setting options.
[Device Preferences]
Check the device information and firmware update.
Manually set the date and time.
.