Settings - Anker Nebula Cosmos Max Manual Del Usuario

All manuals and user guides at all-guides.com

Settings

Go through the setup process when you turn on Nebula Cosmos Max for the first time.
1. Network
This device can be connected to the Internet via a wireless (Wi-Fi) connection.
① On the home page, select
② Follow the on-screen instructions to complete the network connection.
2. Audio
Audio format can be changed via the Audio Settings.
① On the home page, select
Auto change digital audio format
3. HDMI
Choose HDMI 1/2 as the input source. You can also change CEC settings under this
option.
① On the home page, select
CEC Settings
4. Projector
① On the home page, select
[Picture Settings]
[Color Temperature]
[Wall Color]
[Correction correction]
[Zoom]
[Autofocus Correction]
> [Network & Internet] and press
> [Audio Settings] and and press
Enable or disable automatic digital audio format
change between PCM and RAW
> [HDMI] and and press
Press Enter to change CEC settings
> [Projector Settings] and press
Adjust the brightness from 0 to 100%
[Normal] / [Cool] / [Warm]
[White] / [Red] / [Orange] / [Blue] / [Green] / [Cyan] / [Yellow]
/ [Purple]
Enable / disable keystone correction.
[50-100%]
Press Enter to Autofocus Correction.
.
.
.
.
EN
10