Shower
Elbow
Escutcheon
Shower Arm
Apply
plumbers
putty.
Showerhead
2. Install Showerhead
CAUTION: Risk of product damage. To avoid clogging the
showerhead spray outlets, use thread sealant tape on the shower
arm threads. Do not use thread sealant compound (pipe dope).
Remove the temporary nipple from the shower elbow.
Apply a bead of plumbers putty or other sealant to the back of
the escutcheon according to the manufacturer's instructions.
Slide the escutcheon over the shower arm.
Apply thread sealant tape and install the shower arm to the
shower elbow.
Carefully tighten with a clean strap wrench.
Press the escutcheon against the finished wall.
Remove all excess putty.
Turn the main water supply on.
Run hot and cold water through the shower arm to flush out dirt
and debris.
Apply thread sealant tape to the shower arm. Install the screen
washer (if required for your model) and thread the showerhead
to the shower arm.
1006260-2-D
All manuals and user guides at all-guides.com
Shower Elbow
Escutcheon
Shower Arm
Screen Washer
Showerhead
6
Kohler Co.