Sonos ZonePlayer ZP80 Guía De Configuración página 10

6
During the setup process, you will be asked
to press and release the Mute and Volume Up
buttons simultaneously on the ZonePlayer you
are adding to your music system.
Now that your Sonos system is set up, you can connect the ZonePlayer ZP80 to an external
amplifier such as your home theater or your computer.
Connecting to a Home Theater
For additional information on connecting audio devices, please go to our Web site at
http://faq.sonos.com/cables.
1. If you have digital inputs on your home theater receiver, you can use either a TOSLINK optical
audio cable or a digital coaxial cable to connect the ZonePlayer ZP80's digital output to the
digital input on your receiver.
If you have analog inputs on your home theater receiver, use a standard RCA audio cable to
connect the ZonePlayer ZP80's analog audio output to the audio inputs on your receiver.
2. Select the proper input channel on your home theater system.
Controlling the volume from your home theater
By factory default, the line-out level for each ZonePlayer ZP80 is set to Variable. To control the
volume exclusively from your home theater, you can change the line-out level on this
ZonePlayer to Fixed by selecting one of the following options:
• Using the Sonos Controller, from the Music menu, select System Settings. Select Zone-
Player Settings, and use the scroll wheel to highlight the ZonePlayer attached to your
home theater. Select Line-Out Level, and choose Fixed.
• Using the Desktop Controller software, select Set Up Zones from the Zones menu. Select
the ZonePlayer attached to your home theater, and then click Settings. Click the Line-
Out tab, and choose Fixed.
Note: When you change the line-out level to Fixed on your ZonePlayer ZP80, you
will not be able to adjust the volume or the equalization settings using your Sonos
Controller.
All manuals and user guides at all-guides.com
Sonos ZonePlayer ZP80 Setup Guide
Mute button
Volume Up button