Select The Fuel Source (Propane/Lpg) - Power SUA3800iED Manual

Select the Fuel Source (Propane/LPG)

1. Turn the fuel valve knob to the OFF
2. Connect the LPG gas hose to the propane fuel
source. Connect the small end of the LPG gas
hose to the LPG regulator on generator and then
snug with a wrench to prevent leakage.
3. Fully open the Propane/LPG cylinder knob.
4. Turn the fuel source switch to the LPG
position.
5. Turn the engine switch to the "ON"(l) position.
position
6a. Recoil start
6b. Electric start
6c. Remote start
Page 20
Pull recoil starter slowly until resistance is felt,
then pull rapidly.
Turn and hold the ENGINE START/STOP switch
for 5 seconds until the engine start.
Turn and hold the REMOTE START switch for 5
seconds until the engine start.