Marta MT-4300 Manual De Instrucciones página 16

FUNCTIONS
DISPLAY
Display has white led. In program run mode display shows program temperature and cooking time countdown.
DISPLAY INDICATION
COOKING WITH MULTICOOKER
Make sure that the multicooker is clean inside and outside. Check if there are any foreign objects inside or between the pot and heating plate.
Put the pot into the multicooker.
Rotate the pot a bit. Make sure that the pot has intimate contact with heating plate.
Put all ingredients into the pot.
Close the lid.
Put power cord connector into the multicooker socket.
Plug in the multicooker. Don
PROGRAMS
Press button
You will find recommended recipes in our cook book.
Cooking suggestions and requirements
dish could be burnt or it could boil away. Please mind to check and correct time or change cooking program in this case. Some other objective reasons could affect cooking time. They a
storage time and temperature of product. Please mind that written cooking time is recommended and may vary. The cook book is just our recommendation and advice.
To switch off the multicooker press
COOKING TIME AND TEMPERATURE MANUAL SET UP (IN MULTICOOK PROGRAM AND IN CHOSEN AUTOMATIC PROGRAM)
You could either change cooking time and temperature settings in chosen automatic program or set up necessary
Delay program indication
Cooking time settings indication
Cooking temperature indication
Cooking time indication
to choose program until you see indication near necessary program. You see fixed for certain program time and temperature
:
Weight of product you see in our cook book is weight of clean, peeled, defrosted and chopped product. If you want to change our recipe please follow products proportions, otherwise a
and keep it pressed 5 seconds.
16