7865DFU.qxd
8/2/04
C
C
C
05:41 PM
All manuals and user guides at all-guides.com
Placing or removing razor from
charging stand:
◗ Always place razor in stand in an upright
position making sure charging contacts in
bottom of stand fit into recess in bottom of
razor.
◗ Always remove razor from stand by lifting
straight up. Do not tilt razor.
◗ Do not leave the charging stand with the
razor in it continuously plugged into outlet as
it would reduce life of batteries. If storing
razor in stand, remove the plug from outlet as
soon as the razor is fully charged.
Connect cord directly to razor or place
1
razor in charging stand and connect the
small plug of cord to charging stand.
Connect the charging plug into any 100V
to 240V AC outlet. Use only the charging
plug provided.
As you charge razor, the "20" Light on the display
turns red. After approximately 3 minutes, it will
then turn green and blink. As charging continues,
more and more lights of the display meter will
briefly blink green and light up to indicate what
level (percentage) of the batteries have been
charged.
Page 13
(Black plate)
ENGLISH
13