Setting Of Parameters; Enter Setting Mode; Parameter Setting Table - Baxtran RTI Serie Manual De Usuario

User's guide

4. Setting of parameters

In order to accede to the parameters marked with an asterisk (*) the calibration
pulser located in the inferior part of the scale must be pulsed.

4.1. Enter setting mode

To set the parameters it is necessary to enter a secure menu. This is done by
entering a password number when requested.
To enter the parameter menus press the
display after power turned on. The Weight Display will show "
password number to be entered.
Press the
The Parameter menu has 15 functions that can be accessed using the
to cycle through the choices. The WEIGHT display will show the name of the
functions. Also you can press
enter a function press the
weighing.

4.2. Parameter setting table

Display
(*)
F0 CAL
(*)
F1 rES
F2
(*)
F3 CAPA
(*)
F4 Po int
30
All manuals and user guides at all-guides.com
Price Computing Scale
key four times. The display will show "
to select F0, and key
key. At any time press the
When the parameter menu show "F0" press the
The display will then show "
removed from the platform.
After STABLE indicator on, press the
point.
The display will then show the calibration weight requested,
press the key to accept it.
The display will show "
the scale. After STABLE indicator on, press the
scale will calibrate.
Set external resolution, press
duag range), press
Not available.
Set capacity, press
Set weight decimal point, press
key to sure.
key during the initial counting of the
", Press the
Pn- - - -
to select F2...... To
Description
" to request all weight be
unLoAd
key to set the zero
". place the calibration weight on
LOAd
key to change (3000/60000/
key to sure.
key to select, press
key to select, press
Model RTI
" requesting the
Pn
key.
key
key to return to
key.
key. The
key to sure.