3
If the front cover is not fitted correctly, the juicer will not work
and the sides of the oval display and the Auto and Play/Pause
buttons will flash on and off. This will stop when the front cov-
er is fitted correctly and the juicer will return to the selected
function.
4
If the bin is full, the juicer will not work and the lower part
of the oval display and the Auto and Play/Pause buttons will
remain on. You should empty the bin and replace it correctly.
5
If for some reason the juicer becomes blocked while it is op-
erating, the motor will stop automatically after a few seconds.
The four sectors of the oval display and the Auto and Play/
Pause buttons will flash on and off. In this case you should call
the technical Service. In order to known what type of serious
fault has occurred when the juicer is blocked, hold down the
Auto button for five seconds until the oval display lights up.
On releasing the Auto button, it will flash a certain number
Container
Error
6
Container
full
Error
of times indicating the tens, and then the Play/pause button
will flash a certain number of times indicating the units. This
combination will give a number from 10 to 99, thus identifying
the fault number.
If the oval display or the Auto and Play/pause buttons do not
light up, this is due to a lack of power. Check that the switch
is on, that the safety fuse has not blown (Fig. 20).
Blockage
Fault
Service Manual
25