Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
11.2 Party
To activate the function, press the button
for less than 3 seconds. The upper digits display (blinking) the
indication of function timing (for example: MM60 means 60 minutes), whereas the lower digits show the setpoint
temperature during the function.
To modify the duration of the function, press the buttons
and
and confirm with the button
. The
minimum duration is 10 minutes, the maximum duration is 45 days.
Once the duration has been set, use the buttons
and
to select the setpoint utilized during the function.
After confirming with the button
, the countdown begins on the upper digits, indicating the time remaining to the
end of the function. The icon
blinks on the display.
After starting, the function can be stopped with the buttons
or
.
84
cod. 3542A970 - Rev 01 - 03/2022
EN
Publicidad
Tabla de contenido
