Lionelo Braam Manual De Usuario página 15

• After you have fastened the belts, you will hear a distinctive „click".
• Try to move the child safety seat to check its stability.
B. ASSEMBLY WITH ISOFIX
4. Installation in a rear-facing position, the child is secured with safety belts of the child
safety seat (group 0+, I, 0 - 18 kg).
• If necessary, put ISOFIX sheaths (Z) on ISOFIX connectors in the car.
• They facilitate sticking ISOFIX fasteners of the product when car connectors are hard
to access.
• Rotate the child safety seat to the rear-facing position. To do so, press the base 360°
rotation button (M). (see: fig. 13)
• Press ISOFIX button (X) to extend both ISOFIX arms (V). Next grab the seat with both
hands, slide two ISOFIX arms into the fasteners located in the car seat until arms (V)
anchor and you can hear a distinctive „click".
• Push the product towards the seat, press it against the car seat as much as you can.
• Green indicator on ISOFIX button (X) must be visible on both sides; then you can be
sure the seat has been properly secured and fixed.
• Press the support leg adjustment button (Y), next extend the leg and adjust its length
so that it contacts the vehicle floor (the indicator will turn green when the support leg
is sufficiently extended).
• Put the child in the child safety seat and secure it with safety belts of the child safety
seat. (See: fig. 26)
5. Installation in a forward-facing position, the child secured with safety belts of the
child safety seat (group I, 9 - 18 kg).
• If necessary, put ISOFIX sheaths (Z) on ISOFIX connectors in the car.
• They facilitate stocking ISOFIX fasteners of the child safety seat when car connectors
are hard to access.
• Turn the child safety seat to a forward-facing position. To do so, press the base 360°
rotation button (M). (see: fig. 13)
• Press ISOFIX button (X) to extend both ISOFIX arms (V). Next grab the seat with both
hands, slide two ISOFIX arms (V) firmly in fasteners in the car seat until arms anchor
and you can hear a distinctive „click".
• Push the product towards the car seat, press it against the car seat as much as you can.
• Green indicator on ISOFIX button (X) must be visible on both sides; then you can be
sure the seat has been properly secured and fixed.
• Press the support leg adjustment button (Y), next extend the leg and adjust its length
so that it contacts the vehicle floor (the indicator will turn green when the support leg
is sufficiently extended).
‑ 15 ‑ EN