CAUTION!
Two-pole fuse.
Before opening the housing cover, disconnect the printing system from the mains supply and wait for a
moment until the power supply unit has discharged.
NOTICE!
For Norway and Sweden: Devices which are attached via a power connector with a connection to safety earthing
to the safety earthing of the electric equipment of the building and to a cable distribution system with coaxial
cables can cause fire risks under certain circumstances. Therefore the connection with a cable distribution system
must be made by a device which provides an electric insulation underneath a specific frequency range.
Decommissioning and Dismantling
NOTICE!
The decommissioning of printing system can only be carried out by trained staff.
CAUTION!
Danger of injury by imprudent handling when lifting or placing the printing system.
Do not underestimate the weight of the printing system (11 ... 13 kg).
Protect the printing system against uncontrolled movement.
Environmentally-Friendly Disposal
Manufacturers of B2B equipment are obliged to take back and dispose of old equipment that was manufactured after 13 August
2005. As a principle, this old equipment may not be delivered to communal collecting points. It may only be organised, used and
disposed of by the manufacturer. Valentin products accordingly labelled can therefore be returned to Carl Valentin GmbH.
This way, you can be sure your old equipment will be disposed of correctly.
Carl Valentin GmbH thereby fulfils all obligations regarding timely disposal of old equipment and facilitates the smooth reselling
of these products. Please understand that we can only take back equipment that is sent free of carriage charges.
The electronics board of the printing system is equipped with a battery. This must only be discarded in battery collection
containers or by public waste management authorities.
Further information on the WEEE directive is available on our website www.carl-valentin.de.
English
SPE II
69