STEINEL GL 65 S Manual De Instrucciones página 54

Factory settings
– Time setting: 5 seconds
– Twilight setting: daylight mode 1,000 lux
– Basic light level: OFF
Basic light level (H)
Standard programme
– Soft light start / no basic light level
What is soft light start?
The sensor-switched light features a soft light start
function. This means that when turned ON, the light is
not switched directly to maximum output but constantly
builds up brightness to 100% within a short period of
time. Brightness is also gradually reduced when the light is
switched OFF.
User-friendly economy programme
Soft light start + basic light level until the middle of the
night Basic light level ON from twilight setting selected until
the middle of the night
How does the user-friendly economy programme work?
The sensor-switched light does not have an integrated
clock. The middle of the night is only determined on the
basis of the length of darkness phases. To work perfectly,
therefore, it is important for the sensor-switched light to
be permanently connected to the power supply during this
period. During the first night (calibration phase) basic light
level remains activated throughout the night. The values
are saved even in the event of a mains power failure. We
do not recommend interrupting the power supply in this
the programme. The values are determined over several
nights. The sensor-switched light should, in the event
of any fault occurring, be monitored over several nights
to ascertain whether the switch-off time moves towards
midnight.
– 21 –
GB
Index