Dc Tromb 600; Safety Instructions; Environmental Protection; Work Area Environment - Dustcontrol DC Tromb 600 Traducción Del Manual De Instrucciones De Servicio Original

Safety instructions

Read the following Safety Instructions before starting this machine. Save the User Guide for future reference. Failure to comply
with the Safety Instructions voids the warranty and may result in personal injury and damage to the product. Dustcontrol is not
responsible for damage to the equipment caused by improper installation or improper operation of the equipment.
Warning
This machine is intended for professional use only.
Use only original accessories and consumables that are included in Dustcontrol's range.
WARNING
Use the machine for its intended purpose. Follow the instructions for the material to be extracted.
WARNING
This machine is only intended for extraction of dry material.
WARNING
When using electrical devices, basic safety instructions must be followed to reduce the risk of fire, electric
shock or personal injury.
WARNING
If incorrect or non-OEM parts are used (especially filters, hoses and plastic bags), the machine can leak
hazardous dust which may result in personal injury.

Environmental protection

Recycle packaging and components according to local regulations. For more information, contact your nearest recycling center.

Work area environment

Do not expose the machine to moisture. Do not use it in damp or wet areas or close to flammable liquids or gases.
CAUTION
This machine must only be used and stored in a dry environment.
CAUTION
Do not rinse the machine with water.
Overload
Never let the machine work fully throttled, as this poses a risk of overheating.
DC Tromb 600, 99063-A 13