UFESA CG7114 CAPRICCIO 6 Manual De Instrucciones página 13

Never use your co ee machine without water in it.
Do not put the jug on a stove or in a microwave for re-heating of co ee.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact
an o cial technical support service. In order to prevent any risk of danger, do not open the device. Only
qualified technical personnel from the brand´s O cial technical support service may carry out repairs or
procedures on the device.
B&B TRENDS, S.L. disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings.
INSTRUCTIONS FOR USE
Before use
Make sure that all the product's packaging has been removed.
Before making co ee for the first time, we recommend using the co ee maker twice with water only, in
order to clean the system.
Filling with water
The deposit must be filled with water before turning the appliance on.
Lift the lid
Fill the compartment with cold water.
Fill the tank observing the MAX and MIN levels according to the number of cups of co ee to be made
Close the lid.
Filling with co ee
Open the filter holder.
Remove the filter holder.
Fill the removable filter with ground co ee. Not exceed 3/4 of the capacity
Check that the removable filter is perfectly fitted into the filter holder.
Fit the filter holder in the appliance once more.
You can use the measuring spoon to add co ee.
Use
The anti-drip system prevents the co ee from spilling when the jar is not in its position. However, if the
jar is kept out of its position for over 30 seconds, before all the water has passed through the filter, the
filter may overflow.
If you want to keep the co ee hot, place the jar on the heating plate without switching o the co ee
maker
Auto-disconnection function
For the purpose of saving energy, the appliance goes to self-disconnection mode 30-40 minutes after
the co ee-making process has finished if during the user has not performed any action with it during this
period.
To return to normal operation, simply press the ON/OFF switch.
13