Intended Use - Makita UA004G Manual De Instrucciones

Saw chain, guide bar, and sprocket combination
Saw chain type
Number of drive links
Guide bar
Sprocket
Saw chain type
Number of drive links
Guide bar
Sprocket
WARNING:
Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may
result.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Beware of electrical lines, risk of electrical
shock.
Keep distance at least 15 m.
Maximum permissible cut length
Direction of chain travel
Chain oil tank
Hot surfaces - Burns to fingers or hands.
Guide bar length
Cutting length
Pitch
Gauge
Type
Number of teeth
Pitch
Guide bar length
Cutting length
Pitch
Gauge
Type
Number of teeth
Pitch
Only for EU countries
Ni-MH
Li-ion Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.

Intended use

The tool is intended for pruning branches and limbs.
11 ENGLISH
90PX
46
300 mm
296 mm
3/8"
1.1 mm
Sprocket nose bar
6
3/8"
91PX
46
300 mm
296 mm
3/8"
1.3 mm
Sprocket nose bar
6
3/8"