Safety In The Workplace - hillvert HT-LOGAN-14SA Manual De Instrucciones

s) Do not overfill the fuel tank and avoid spilling fuel when refueling. Spilled fuel
or vapor may ignite. If a spill occurs, make sure the area is dry before starting
the engine.
t) After refueling, make sure the fuel tank cap is properly tightened.
u) Do not operate the engine or refuel in a confined area without proper
ventilation.
v) Avoid operating the machine in confined spaces, tunnels, or other poorly
ventilated areas because the exhaust contains deadly/harmful fumes and
gases. If machine operation cannot be avoided in such a place, provide
adequate exhaust extraction.
w) During transport: Stop the engine. Close and secure the fuel tank cap. Drain
the fuel from the fuel tank before transporting over long distances or bumpy
roads.
x) Keep flammable materials (petrol, matches, straw, etc.) away from the
exhaust.
2.2.

Safety in the workplace

a) Keep the work area tidy and well lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing and use common sense
when using the device.
b) Do not use the device in an explosive area, for example in the presence of
flammable liquids, gases or dust. The device produces sparks that can ignite
dust or fumes.
c) If you find any damage or irregularities in the operation of the device,
immediately turn it off and report it to an authorized person.
d) If you have any doubts as to whether the device is working properly or if it is
damaged, contact the manufacturer's service department.
e) Only the manufacturer's service department can repair the device. Do not
carry out repairs yourself!
f) In case of open flames or fire, use only dry powder or snow (CO2) fire
extinguishers to extinguish the live equipment.
g) No children or unauthorized persons are allowed in the work area. (Inattention
may result in loss of control of the device.)
h) Use the device in a well-ventilated area.
i) Check the condition of the safety stickers regularly. Replace them if they are
illegible.
j) Keep these instructions for use for future reference. If the device is to be
passed on to a third party, the operating instructions must also be handed over
together with the device.
k) Keep the packaging and small assembly parts out of the reach of children.
l) Keep the device away from children and animals.