hillvert HT-LOGAN-14SA Manual De Instrucciones página 47

Problems with
spraying the
liquid
Problems with
powder
spraying,
granulate
scattering
Lack or broken stream of liquid
Liquid is leaking
Lack of or interrupted discharge
of chemical agent
Metering valve not working
correctly
Scattering of
powder /
granules
Fuel mixed Replace
with water
Clogged valve Clean
or nozzle
regulator
Clogged hose Clean
No pressure Tighten the
tank cover,
tighten the
tank with
two bolts at
the bottom
Lose bolts Tighten
securing the
tank at the
bottom
Spray cap Correct the
incorrectly assembly
assembled
Metering Set the lever
lever set to properly
closed
position
Powder or Clean
granulate
contains dirt
Lumpy Break it
powder or down into
granules small pieces
Moistened Dry
powder or
granules
The valve Adjust valve
cannot be by setting
closed the metering
lever
Metering Clean
valve is
blocked
Incorrectly Correct the
installed cap assembly