Working With The Unit - Fromm & Starck STAR ATFE 15 Manual Del Usuario

• Connect the cable (8) to the port marked DC on the back of the control panel (3).
• Connect the cable (8) to the power supply connector (6).
• Connect the power cord (5) to the power supply (6).
• Connect the motor cable to the port marked M1 on the back of the control panel
(3).
• Insert the power supply (6) into the holder.
• Arrange the wires and place them in the terminal (7).
3.3.

Working with the unit

Height adjustment:
• Press the "up" button to increase the height of the desk (holding the button raises it
continuously). When the highest level is reached, the display will show "top".