Working With The Unit; Control Panel Description - Fromm & Starck STAR ATFE 10 Manual De Instrucciones

3.3. Working with the unit

Height adjustment:
1. Connect the plug to a power outlet.
2. Use the buttons on the control panel to adjust the height.

CONTROL PANEL DESCRIPTION:

There are 7 buttons on the control panel:
▲ : up height adjustment button up
▼ : down height adjustment button
1 : button of the first height saved by the user
2 : button of the second height saved by the user
3 : button for the third height saved by the user
M : height memory button
A : button to set an alarm reminding the user to change the position
Control panel operation:
• Height adjustment function:
The height can be adjusted with ▲ or ▼ buttons. The current height is shown
on the LED display.
• Height memory function:
a. By pressing ▲ or ▼ you can set the desired height. To memorize the height,
press M; – S- will be displayed on the screen. When you press 1, 2 or 3, a
height will be assigned to the pressed button and S-1, S-2 or S-3 will be
displayed respectively.
b. By pressing 1, 2 or 3 the stored height will be automatically set.
• Reminder function:
a. To activate the reminder function, press A – ON or on will be displayed.
b. Two seconds later, press▲ or ▼, to set the reminder time only when the
display screen is flashing. The default reminder time is 45 minutes, displayed
LD - LED display board